#164824  by Pointclear
 Tue Feb 19, 2019 4:27 pm
I have been slowly working my way up to starting a thread on these builds. I’ve always loved wolf, but I’ve been a little hesitant to do a complete reproduction. Here is where I am so far: three neck blanks and one body blank, and another two bodies in store. Woods are black walnut, cherry, and 200 year old maple. All hand selected. One wolf will have super distortions and a buffer, one will have 69 Strat pick ups and a blaster, and the other I haven’t decided upon yet. I’m curious about break angle strategies for the body and people’s tips in general. I love oil finishes as well and may go for a danish oil satin type finish on at least one of them. Please let me hear you’re thoughts and feedback - guitar building is a whole new world for me! Some of you have already been a huge help in getting this far.
Image
Image
tcsned, Seabass, Bear62 and 2 others liked this
 #164835  by TI4-1009
 Wed Feb 20, 2019 10:08 am
Tip: talk with augustwest1
Pointclear, Jblue76 liked this
 #164837  by jalevinemd
 Wed Feb 20, 2019 10:36 am
Couldn't agree more. As the curator of one of Bob's works of art, you should definitely speak with him.
 #164863  by augustwest1
 Thu Feb 21, 2019 6:27 pm
Don't be shy!

I don't think I would have ever put together a guitar without all the help I got from Anthony, Brian and Leo on this forum. So I'm always ready to play my part in keeping that train rolling.

In answer to your immediate question: I "calculated" the break angle using the method explained here: https://www.youtube.com/watch?v=95A2Rn91_Vw

In the end, I think it wound up to be 2.3 or 2.8 degrees. I don't remember. And it doesn't matter. Which is the whole point of this method.
paulinnc and 1 others liked this
 #164870  by Pointclear
 Thu Feb 21, 2019 8:34 pm
Thanks for chiming in. I’ve watched that same video! Glad to know I’m on the right track. Your google photo album has been indispensable for me. Thank you for taking the time to put that together.
I’m waiting on truss rods to come in and then I’ll work out the necks. I’m using the stew Mac hot rod double actions. It looks like they will need a deep pocket.
 #164986  by Pointclear
 Sun Mar 03, 2019 2:07 pm
ImageLittle update: Working slowly in Roger Fritz’s shop, I finally got my truss rod slots routed after making jigs and fiddling with things for most of a day. I’m using stewmacs hot rod dual action truss rods, but I may go for a more low-profile truss rod in the future - the slot for stew macs is really deep.
https://share.icloud.com/photos/01Kthth ... TFr6Tfi76w
 #164988  by ac4468
 Sun Mar 03, 2019 4:36 pm
Pointclear wrote:ImageLittle update: Working slowly in Roger Fritz’s shop, I finally got my truss rod slots routed after making jigs and fiddling with things for most of a day. I’m using stewmacs hot rod dual action truss rods, but I may go for a more low-profile truss rod in the future - the slot for stew macs is really deep.
https://share.icloud.com/photos/01Kthth ... TFr6Tfi76w
Beware of Stewmacs low profile Hot Rod's. Out of 12 I just received, no two were the same. The welds were off and most didn't fit the properly routed slots without having to hand cut or modify the slots. Clearly they changed vendors or manufacturers. All but one are being returned.
 #164997  by Pointclear
 Mon Mar 04, 2019 7:35 am
I used the regular-depth dual action from stewmac, since you advised against the low-profile hot rod, and I had to send one back as well.