[TI4-1009]

With the recent wiring talk I thought these might be useful.

I searched for the post that had these in them but can't locate it- it was 2-3 years ago. Great for the "wiring diagram impaired", I found them really helpful when I wired my Tiger. I think there was one error- two wires reversed on the ganged pot- the ground should go to 29c, not 27c? So that when you turned the knob one pot goes up and the other down. Other than that great stuff. Thanks again to whoever did this!





And giving proper credit I'm pretty sure these are based off Waldo's wiring diagram.

[jmfranc]

That was me. And it was a reworking of Waldo's which I found hard to follow. And yes - you caught my error on that one.

[TI4-1009]

Thanks again- nice job! I used it again when wiring my Wolfish.

[jmfranc]

Here's the corrected layouts:

[Customvibrations]

In this diagram the negative to the battery is going to the tip. Am I right that on both jacks, the ring and the tip wires are crossed?

[Customvibrations]

How does the switch work if all the wires are going to one side? It seems you could only use one pickup at a time and not get the neck+middle abd bridge+middle together.

[hippieguy1954]

The diagrams are correct and if you follow them exactly, you will have no problems.

Knowing how the 5 way switch works is cool. This should help. http://www.premierguitar.com/articles/T ... ch_Part_II

[TI4-1009]

Yup. I've done two builds using this diagram and they worked just fine.