Push/Pull DPDT pot coil tap direction

Push/Pull DPDT pot coil tap direction

Postby TeeJay » Sat Apr 08, 2017 8:00 am

Is there a way to wire a Super 2 to a push/pull dpdt pot so that the switch/knob is down in single coil mode?
TeeJay
Steal Your Face
Steal Your Face
 
Posts: 204
Joined: Sat Jul 27, 2013 7:56 am
Location: Kansas City, Missouri

Re: Push/Pull DPDT pot coil tap direction

Postby waldo041 » Sat Apr 08, 2017 8:23 am

TeeJay wrote:Is there a way to wire a Super 2 to a push/pull dpdt pot so that the switch/knob is down in single coil mode?



Yes sir. Find the 2 lugs that have continuity when the switch is in the down position. One of the lugs will be the middle lug. Then wire the middle lug to ground and the black and white to the other lug that has continuity. This will ground the black and white in the down position and render the Super 2 in single coil cut. The up position will release the black and white from ground rendering the Super 2 in humbucker.

~waldo
Disclaimer: I make and sell Buffers. I also sometimes Modify, Build and sell preamps and amplifiers. My opinions are not intended to be sales pitches. I am a one man shop and prefer to spend time with my wife and family, i work full time on call and love to spend my spare time doing other things. I only make, modify or build things for those that seek them.
User avatar
waldo041
Senior Member
 
Posts: 3375
Joined: Thu May 19, 2005 10:58 am

Re: Push/Pull DPDT pot coil tap direction

Postby TeeJay » Sat Apr 08, 2017 8:41 am

Sweet. Thanks waldo.
TeeJay
Steal Your Face
Steal Your Face
 
Posts: 204
Joined: Sat Jul 27, 2013 7:56 am
Location: Kansas City, Missouri


Return to Guitar Building and Mods

Who is online

Users browsing this forum: No registered users and 1 guest