Mattsoncaster II

Chat about Equipment Info

Mattsoncaster II

Postby SarnoMusicSolutions » Mon Nov 15, 2010 11:28 am

Just a few tweaks, but it's up and running. Nice and light, super tone.


Mattsoncaster II - 1.jpg
Mattsoncaster II - 1.jpg (107.52 KiB) Viewed 1287 times



Mattsoncaster II - 2.jpg
Mattsoncaster II - 2.jpg (114.3 KiB) Viewed 1287 times



Mattsoncaster II - 4.jpg
Mattsoncaster II - 4.jpg (92.3 KiB) Viewed 1287 times
... and it's just like any other day that's ever been...
User avatar
SarnoMusicSolutions
Senior Member
 
Posts: 1062
Joined: Tue Jan 27, 2009 6:15 pm
Location: St. Louis, MO - USA

Re: Mattsoncaster II

Postby SarnoMusicSolutions » Mon Nov 15, 2010 11:35 am

Mattsoncaster II - 7.jpg
Mattsoncaster II - 7.jpg (76.82 KiB) Viewed 1280 times
Mattsoncaster II - 5.jpg
Mattsoncaster II - 5.jpg (97.36 KiB) Viewed 1280 times
... and it's just like any other day that's ever been...
User avatar
SarnoMusicSolutions
Senior Member
 
Posts: 1062
Joined: Tue Jan 27, 2009 6:15 pm
Location: St. Louis, MO - USA

Re: Mattsoncaster II

Postby Rusty the Scoob » Mon Nov 15, 2010 11:38 am

That is awesome! I'm not normally a pickugardless-strat guy but for that top I'll happily convert. Really, really nice!

Needs something in the Fender-logo spot on the headstock. Sarno sticker?
User avatar
Rusty the Scoob
Senior Member
 
Posts: 2308
Joined: Mon Mar 03, 2008 5:28 am
Location: Concord, MA

Re: Mattsoncaster II

Postby Tennessee Jedi » Mon Nov 15, 2010 11:48 am

That is a sweet looking set up - beautiful looking
:smile:
User avatar
Tennessee Jedi
Senior Member
 
Posts: 4223
Joined: Mon Oct 08, 2007 6:29 am
Location: Bucks Co.Pa

Re: Mattsoncaster II

Postby SarnoMusicSolutions » Mon Nov 15, 2010 11:53 am

Yeah, Jeff picked out the look for the thing for the most part. It's all Warmoth, custom ordered, dyed blue top, sprayed blue back, nitro finish. I picked the chrome rings, knobs and tip, but I also got a set of the vintage off-white, cream colored knobs and tip so he has the option. I must give credit to John Higgins here in St. Louis. He's one of the region's top luthiers. John did the custom routing for the Roland GK-jack and also some internal routing to fit the Roland GK circuit board. John also did the basic neck mounting/alignment, cleaned up the frets, intonated, all the basic guitar setup stuff. I can do that kind of stuff too, but John's better, so I had him get it all going. Then I brought it home to do the electronics. So really I can only take so much credit. I'm more of a facilitator of Jeff's vision for the ultimate guitar for him in the DSO gig. Jeff's totally a strat guy, and this feels just right in that regard. Light swamp ash body, thin maple cap, maple neck with compound radius.

The toggle closest to the jacks is the MIDI up/down selector. And that bottom tone knob is actually MIDI volume. The middle toggle is a global Humbucker/Single coil switch. The top toggle is the OBEL. Waldo's buffer lives inside. Stock Dimarzio Super II's. Pretty straightforward Jerrycaster.

Brad
... and it's just like any other day that's ever been...
User avatar
SarnoMusicSolutions
Senior Member
 
Posts: 1062
Joined: Tue Jan 27, 2009 6:15 pm
Location: St. Louis, MO - USA

Re: Mattsoncaster II

Postby playingdead » Mon Nov 15, 2010 12:02 pm

Looks great, Brad!
User avatar
playingdead
Senior Member
 
Posts: 1729
Joined: Wed Mar 26, 2008 9:55 am
Location: Boston, MA

Re: Mattsoncaster II

Postby jester536 » Mon Nov 15, 2010 12:06 pm

I'm guessing the cavity for the electronics is rather full. I modded my Strat and we put the buffer in the back cavity...but that wasn't an option for you. Looks fantastic.
Beautiful work.
If the thunder don't getcha then the lightning will!
http://www.reverbnation.com/unchartedwaters
User avatar
jester536
One More Saturday Night
One More Saturday Night
 
Posts: 404
Joined: Fri Dec 12, 2008 1:05 pm
Location: Helena, Montana

Re: Mattsoncaster II

Postby SarnoMusicSolutions » Mon Nov 15, 2010 12:17 pm

Pretty full in there, but surprisingly easy to fit. The separate battery compartment saved me for sure. I didn't do a full copper shield everywhere because it kind of started to get assembled and fit and at some point, honestly, I didn't want to undo everything to get the copper in there everywhere. We'll see if it's a problem. I did shield the backplate and some critical areas near the signal path and high Z. Here's the gore and guts.

B
Mattsoncaster II - 10.jpg
Mattsoncaster II - 10.jpg (110.81 KiB) Viewed 1243 times
Mattsoncaster II - 11.jpg
Mattsoncaster II - 11.jpg (101.75 KiB) Viewed 1243 times
... and it's just like any other day that's ever been...
User avatar
SarnoMusicSolutions
Senior Member
 
Posts: 1062
Joined: Tue Jan 27, 2009 6:15 pm
Location: St. Louis, MO - USA

Re: Mattsoncaster II

Postby JonnyBoy » Mon Nov 15, 2010 12:32 pm

Holy crap!! That's cool. I like to see the the goods behind the scenes... You still have some room... but not much :-) He's really diggin' on Warmoth's guitars huh? They did a stellar job on the finish/construction. You too!
http://otislotus.net/ Finally finished our new site...
User avatar
JonnyBoy
Senior Member
 
Posts: 2134
Joined: Mon Mar 01, 2010 8:35 am
Location: the south swamps

Re: Mattsoncaster II

Postby waldo041 » Mon Nov 15, 2010 12:35 pm

very nice!

peace,
waldo
"Tone is in the instruments. Technique in the hands. Do what you will." ~ quote from some guy at the TGP forum
waldo041
Senior Member
 
Posts: 2830
Joined: Thu May 19, 2005 10:58 am
Location: Indiana

Re: Mattsoncaster II

Postby jdsmodulus » Mon Nov 15, 2010 1:50 pm

Is the large green board the Roland? I have an extra that Im thinking about taking apart? Very nice build!
jdsmodulus
Senior Member
 
Posts: 1252
Joined: Tue Dec 02, 2008 2:12 pm

Re: Mattsoncaster II

Postby tcsned » Mon Nov 15, 2010 2:08 pm

Brad,
Is he running the Roland separately from the guitar output? 3 cables out (guitar line, synth line, efx loop)? Or does he run the guitar signal out of the synth? I am having to split mine out due to the way the guitar out of the synth messes with the gain/tone of the signal. I'm using the Graph Tech Ghost pickup not a GK.

btw - I'm really getting the SMS Classic dialed in nicely. Best new toy I've gotten in a long, long time - thanks!!
User avatar
tcsned
Senior Member
 
Posts: 2730
Joined: Sat Mar 21, 2009 2:50 pm
Location: Blacksburg, VA

Re: Mattsoncaster II

Postby SarnoMusicSolutions » Mon Nov 15, 2010 3:14 pm

Yes, the larger PC board is the Roland. We bought the GK-Kit designed for this type of internal install. The MIDI audio signal will NOT come from the guitar, but instead will come directly out of the GR-50 rack unit. The 13-pin Roland cable will connect this GK circuit board to the rack unit so that the guitar can talk to it. On the guitar there's a scroll up/down toggle and a MIDI volume control. The audio paths are completely separate. The guitar is just like a non-midi guitar with regards to the audio ins and outs. So basically they're two completely separate things. The guitar and MIDI audio never mix. At the gig, Jeff's MIDI will go direct from the Roland rack unit into a DI Box and to the PA and to his monitor. He'll have fingertip control over guitar volume and MIDI volume separately. A blend or just either one, cake.

Brad
... and it's just like any other day that's ever been...
User avatar
SarnoMusicSolutions
Senior Member
 
Posts: 1062
Joined: Tue Jan 27, 2009 6:15 pm
Location: St. Louis, MO - USA

Re: Mattsoncaster II

Postby Chinarider1A » Mon Nov 15, 2010 3:41 pm

Looks great Brad!
Chinarider1A
Brent
Brent
 
Posts: 93
Joined: Tue Apr 27, 2010 9:00 am

Re: Mattsoncaster II

Postby jdsmodulus » Mon Nov 15, 2010 4:59 pm

this is great, Ill will look for this Kit? I have never seen one before, But I have the GR50 as well and have been tweaking how to run it more effeciently. These kits are easy to find, I never thought to look for one. 269$ free shipping from all of the usual places. I will get this soon! seems like a fairly easy install?
jdsmodulus
Senior Member
 
Posts: 1252
Joined: Tue Dec 02, 2008 2:12 pm

Next

Return to Grateful Dead Equipment Discussion

Who is online

Users browsing this forum: No registered users and 2 guests