Doug Irwin basses

Chat about Equipment Info

Doug Irwin basses

Postby Larry Robinson » Sat Jul 09, 2016 8:44 pm

First of all, Phil Saam passed away last week at the age of 63, from complications of diabetes. He was a good friend and I'd known him since the mid 1970's when I started working at Alembic. Phil was a hell of a bass player and was in the Beach Blanket Babylon production in SF for several years as their bass player in the orchestra. I was pretty sad to hear of his death, but it had been a downward spiral for many years, and he was at the point where he couldn't even feel the strings under his fingers,so he had to give up playing. I hate to say it, but he is probably better off than having to go through more years of misery.

Phil had two basses that he played all the time - an Irwin 4 string that was built just before Doug made the tiger guitar for Jerry, and a 5 string that had a more checkered history.

I keep getting notices from admin here that I can't upload any photos, so you can see these beasts here -

The 4 string is all koa and walnut, and has sliding pickups with an Alembic harness. The Walter Crane image on the back was originally inlaid by Doug, but Phil had me redo it 2% larger, as there was more space around the inlay than he wanted to see.

As far as the 5 string bass, Phil paid Doug Irwin several thousand dollars to make it, probably around 1970-71, and after ten years of no progress he finally took back what had been done with it and paid me to finish it. When I got it there was an uncarved neck blank with a fingerboard attached, but no peghead plate. The fingerboard was inlaid and fretted. It doesn't look like Doug's inlay work, but I'd hazard a guess that he may have paid Bruce BecVar to do it. It's quite nicely done. There were two purple heart and maple body halves in the typical Alembic sandwich style, but they hadn't been rounded over or carved and there were no maple plates in them or control access plates in the back. I did all that stuff at my shop in Cotati, including finish and a set of Alembic Series 1 electronics and sliding pickups, finishing around 1981.

Somewhere around 2000 Phil had Michael Dolan work on it, and the electronics were changed out, and the peghead had been broken, so that was replaced along with different tuners and a cheesy inlay that I would rather not be associated with, so the bass is really a Frankenstein, although it plays great and sounds killer.
User avatar
Larry Robinson
Wall of Sound
Wall of Sound
Posts: 11
Joined: Thu Apr 23, 2009 3:45 pm
Location: PO Box 308, Valley Ford, Ca. 94972

Re: Doug Irwin basses

Postby TI4-1009 » Sat Jul 09, 2016 9:55 pm

Thank you Larry! Great to have you on the board.
"Do not write so that you can be understood, write so that you cannot be misunderstood." -Epictetus

First show: 8/16/69 (Woodstock)
Last show: 3/19/95 (Unbroken Chain breakout)
Member of the Four-Decade Club
Charter Member, President & CEO of OAD (Order of the Ancient Deadheads)
User avatar
Senior Member
Posts: 2066
Joined: Fri Aug 20, 2010 6:27 am
Location: Upstate NY- Toodaloo

Re: Doug Irwin basses

Postby tcsned » Sun Jul 10, 2016 7:26 am

Sad to hear of his passing, sorry for the loss of your friend.

It had been a while since I've looked around your website, man, you do the most amazing work/art.
User avatar
Senior Member
Posts: 3216
Joined: Sat Mar 21, 2009 2:50 pm
Location: Blacksburg, VA

Re: Doug Irwin basses

Postby aiq » Sun Jul 10, 2016 9:18 am

Thanks for sharing. RIP, Phil.
User avatar
Senior Member
Posts: 561
Joined: Sun Sep 27, 2009 6:52 am
Location: Gulf Coast.

Re: Doug Irwin basses

Postby Rusty the Scoob » Mon Jul 11, 2016 6:28 am

Sad news, Larry. Thanks for letting us know.
User avatar
Rusty the Scoob
Senior Member
Posts: 2437
Joined: Mon Mar 03, 2008 5:28 am
Location: Concord, MA

Return to Grateful Dead Equipment Discussion

Who is online

Users browsing this forum: No registered users and 6 guests